| Issue |
MATEC Web Conf.
Volume 373, 2022
10th edition of the International Multidisciplinary Symposium “UNIVERSITARIA SIMPRO 2022”: Quality and Innovation in Education, Research and Industry – the Success Triangle for a Sustainable Economic, Social and Environmental Development
|
|
|---|---|---|
| Article Number | 00009 | |
| Number of page(s) | 6 | |
| DOI | https://doi.org/10.1051/matecconf/202237300009 | |
| Published online | 20 December 2022 | |
Experimental determination of the lower explosion limit for two gasoline samples
National Institute for Research and Development for Mine Safety and Protection to Explosion - INSEMEX, Department of Safety Mineral Resources, 32-34 G-ral Vasile Milea, Petrosani, Romania
* Corresponding author: irina.nalboc@insemex.ro
The explosive atmosphere may be caused by flammable gases / vapours or combustible dust. If the amount of the substance, mixed with air, is sufficient, then a source of ignition is needed to cause an explosion. Liquids (for example petrol and other fuels) and solvents from industrial products emit flammable vapours which, when mixed with air, can ignite or explode. At normal temperatures, flammable liquids can emit enough vapours to form combustible mixtures with air, heat, and often thick, black, and toxic clouds of smoke. The behaviour of a fuel-oxidant mixture is characterized by certain explosions parameters, including explosion limits, which characterize the range of concentrations in which combustion propagates at very high speeds. For this work were performed experimental determination of the lower explosion limit for two commercial gasoline samples.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.