| Issue |
MATEC Web Conf.
Volume 372, 2022
International Conference on Science and Technology 2022 “Advancing Science and Technology Innovation on Post Pandemic Through Society 5.0” (ICST-2022)
|
|
|---|---|---|
| Article Number | 08004 | |
| Number of page(s) | 3 | |
| Section | Process Engineering and Manufacture | |
| DOI | https://doi.org/10.1051/matecconf/202237208004 | |
| Published online | 08 December 2022 | |
Service Load Analysis of Timber Construction Truss
1 Department of Civil Engineering, Faculty of Engineering, Universitas Musamus, Merauke 99600, Indonesia
2 Department of Civil Engineering, Faculty of Engineering, Universitas Musamus, Merauke 99600, Indonesia
* Corresponding author: budi@unmus.ac.id
This study aims to determine the service load capacity of existing truss construction using the wood material. Analysis and calculations were performed on tensile members, compression members,connection, and deflections that occur using the standard SNI 7973 : 2013. The existing truss construction needs to be analyzed for its overall strength so that the function of the building can be maximized. The results of the research on the existing truss construction obtained that the value of the truss construction capacity in carrying the service load was due to the strength of the connection with a service load of 350 kgf/m. The deflection that occurs is 35.5 mm, far beyond the maximum deflection of 7.14 mm, so it is necessary to repair the connection by increasing the number of connecting devices or replacing the connection tools using bolts.
Key words: Timber truss construction / cross-sectional capacity / service load
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.