| Issue |
MATEC Web Conf.
Volume 357, 2022
25th Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2020)
|
|
|---|---|---|
| Article Number | 03008 | |
| Number of page(s) | 12 | |
| Section | Machine Dynamics and Multibody Systems Simulation | |
| DOI | https://doi.org/10.1051/matecconf/202235703008 | |
| Published online | 22 June 2022 | |
A Flexible Mechanism Based Vibration Isolator for Machine Tool Application
1 Vishwakarma University, Pune, India
2 AGH University of Science and Technology, Al. Adama Mickiewicza 30, 30-059 Kraków, Poland
email: nitinsatpute123@gmail.com
email: iwaniec@agh.edu.pl
The paper presents novel design of vibration absorber with innovative features including use of flexible link based mechanism at the interface of tool holder and cutting tool. The mechanism ensures modification of the dynamic force interaction at the damping element and results in lower force transmissibility. It ensures amplification of the relative velocity at the damping element, which results in significant reduction of the damping element mass used for energy dissipation. The presented absorber has advantages of passive and economical operation in comparison to the active and semi-active solutions. Further, the proposed solution results in up to 53% reduction in the force transmissibility. A real size design has been presented for frequency range of 0-1100 Hz and maximum force amplitude of 700 N. Numerical simulations have been performed with consideration of flexible joint and structural element dynamics. Simulation results with FEA and PRBM approach have been compared with detailed analysis of the important design parameters.
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.