| Issue |
MATEC Web Conf.
Volume 355, 2022
2021 International Conference on Physics, Computing and Mathematical (ICPCM2021)
|
|
|---|---|---|
| Article Number | 02013 | |
| Number of page(s) | 10 | |
| Section | Mathematical Science and Application | |
| DOI | https://doi.org/10.1051/matecconf/202235502013 | |
| Published online | 12 January 2022 | |
Numerical simulation and combustion analysis of coal and biomass co-combustion
epartment of Power Engineering, North China Electric Power University, Baoding, China
* Corresponding author email: lijiahu01@163.com
China began entering the 14th Five-Year Plan period in 2021. With the proposed carbon-neutral long-term goal, the strategic position of clean energy is becoming increasingly prominent. using biomass power generation is one of the main application ways. In order to study the mixed combustion process of coal and biomass, this paper takes 300MW lignite boiler as the research object and uses Fluent software to explore the influence of biomass types and the location of biomass nozzle on the mixed combustion, and obtains the corresponding temperature field, flue gas component field and the distribution of pollutant NO. The results showed that when the biomass particles were sprayed into a fixed position with a certain proportion, the NO emission of wheat, corn and cotton straw was reduced, and the effect of wheat straw was the most obvious. When a certain proportion of wheat straw and coal are co-fired, the higher the biomass nozzle position, the higher the peak temperature in the main combustion zone, and the better the emission reduction effect of NO.
Key words: Biomass energy / Combustion characteristic / Mixed burning / Numerical simulation
© The Authors, published by EDP Sciences, 2022
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.