MATEC Web Conf.
Volume 333, 2021The 18th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2019)
|Number of page(s)||5|
|Published online||08 January 2021|
Examination of the Heat Transfer Model in Gas–Liquid–Solid Three Phases in Presence of Gas Hydrate Particle
Graduate School of Science and Technology, Niigata University, 2-8050 Ikarashi, Niigata 950-2181, Japan
* Corresponding author: email@example.com (R. Ezure), firstname.lastname@example.org (H. Tajima)
Hydrate-based gas separation is often investigated using batch or semi-batch operations. To increase the throughput of the gas mixture without increasing the apparatus volume, it is preferable to perform a continuous operation of hydrate-based gas separation. Therefore, we proposed a flow-type apparatus for performing continuous formation with passing gaseous mixture and subsequently decomposition with passing gas hydrate particles. Characteristics of multiple fluid and heat and mass transfer of hydrate slurry are essential for the efficient operation of the apparatus. In this study, we focused on heat transfer characteristics in the presence of bubbles in water and surfactant solution. First, an apparent overall heat transfer coefficient under pressure during steady operation of the apparatus was calculated on a simple assumption. Next, to control the hydrate amount and position of hydrate-decomposition and hydrate-formation in the apparatus, we focused on the temperature profile of the inside fluid. A heat transfer model using heat balance of defining heat of hydrate-formation and heat transfer of agitation of fluid was made for hydrate-based gas separation apparatus. To evaluate the validity of the heat transfer model, a calculation value is compared with the experimental value.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.