MATEC Web Conf.
Volume 333, 2021The 18th Asian Pacific Confederation of Chemical Engineering Congress (APCChE 2019)
|Number of page(s)||4|
|Section||Heat Transfer and Thermal Engineering|
|Published online||08 January 2021|
Investigation of Temperature Fluctuation of Diode-Rectified Multiphase AC Arc by High-Speed Visualization
Faculty of Engineering, Kyushu University, 744 Motooka, Fukuoka-shi, Fukuoka 819-0395, Japan
2 Taso Arc Co. Ltd., 10-11 Imai, Ohno-shi, Fukui 912-0424, Japan
* Corresponding author: firstname.lastname@example.org
An innovative multiphase AC arc was drastically improved by diode-rectification technique with bipolar electrode. Temperature fields and arc behaviour of the diode-rectified multiphase AC was successfully visualized on the basis of the high-speed camera technique with appropriate band-pass filter optics. Arc temperature was measured by Boltzmann plot method with two line emissions from atomic argon at 675.2834 nm and 794.8176 nm. Arc temperature fluctuates in the range from 7,000 to 13,000 K. The arc temperature near the cathode was higher than 13,000 K, while that near the anode was about 10,000 K. Arc temperature in the centre region in the furnace was about 7,000–9,000 K, which is sufficiently high to melt and evaporate the refractory metals or ceramics. Obtained results suggested the diode-rectified multiphase AC arc is a promising thermal plasma source for material processing at high productivity.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.