| Issue |
MATEC Web Conf.
Volume 330, 2020
International Conference on Materials & Energy (ICOME’19)
|
|
|---|---|---|
| Article Number | 01036 | |
| Number of page(s) | 5 | |
| DOI | https://doi.org/10.1051/matecconf/202033001036 | |
| Published online | 01 December 2020 | |
Numerical simulation of double jet impinging a flat and fixed wall with WALE model
1 Université de Mustapha Stambouli 29000 - Mascara - Algérie; e-mail: r.sahnoun@univ-mascara.dz.
2 Laboratoire de Physique Quantique de la Matière et Modélisation Mathématique (LPQ3M), Université Mustapha Stambouli de Mascara, Algeria
3 Laboratoire énergétique de Longwy (FJV/LERMAB), Université de Lorraine, France
* Corresponding author: author@e-mail.org
This work focuses on the study of the averaged velocity and the turbulent intensity of the double jet impingement is used to separate two adjacent cellule. Numerical LES investigations are carried out in this study. A jet impingement against a flat and smooth surface without recirculation was used for this. The WALE (Wall Adapting Local Eddy) structure models the sub grid-scale tensor. The jet opening ratio is H/e = 10 and the Reynolds Number Re= 2000. Result comparisons to available experimental measurements are performed and good agreements are noticed.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.