MATEC Web Conf.
Volume 328, 2020XXII. International Scientific Conference – The Application of Experimental and Numerical Methods in Fluid Mechanics and Energy 2020 (AEaNMiFMaE-2020)
|Number of page(s)||5|
|Section||Special Experimental Methods in Fluid Mechanics and Energy|
|Published online||18 November 2020|
Maximizing the Safety Production of Energo Gas - Determination of Explosion Characteristics
Energy Research Centre, VŠB-TU Ostrava, 708 33 Ostrava - Poruba, Czech Republic
* Corresponding author: email@example.com
The article is focused on the determination of explosion characteristics of energo gas produced from an industrial scale, biomass gasifier. The results underline that the composition of energo gas from industrial technology has a significant impact on the gas explosion characteristics. The gas explosion experiments were carried out in the spherical 20-L explosion vessel. The Real gas was sampled into the 50-L Tedlar bags, introduced into the vessel and mixed with air by a partial-pressure method. Absolute explosion pressure for energo gas air mixture was higher than 6 bar for the energo gas optimum concentration close to 30 vol. % of fuel. The maximum rate of pressure rise and the deflagration index have been determined. Obtained explosion characteristics could be used to describe the explosion process and to rate the effects of an explosion.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.