| Issue |
MATEC Web Conf.
Volume 324, 2020
3rd International Conference “Refrigeration and Cryogenic Engineering, Air Conditioning and Life Support Systems” (CRYOGEN 2019)
|
|
|---|---|---|
| Article Number | 02009 | |
| Number of page(s) | 7 | |
| Section | Refrigeration Technology and Technics | |
| DOI | https://doi.org/10.1051/matecconf/202032402009 | |
| Published online | 09 October 2020 | |
Investigation of the processes of adsorbent regeneration by compression heat in an adsorption dryer of compressed air
a Ltd ENECON-INGENEERING Moscow, 105005, Russia
b Bauman Moscow State Technical University Moscow, 105005, Russia
c Bauman Moscow State Technical University Moscow, 105005, Russia
vladimir.kozlov@bmstu.ru
piskun@bmstu.ru
olga.ilicheva5@yandex.ru
The results of numerical modeling of the processes of drying and regeneration of the adsorbent by heat of compression are presented on the example of the scheme of adsorption drying with the separation of the air flow on the stage of the cooling of the adsorbent. The dynamics of temperature and humidity parameters within the technological columns at all three stages of the adsorption and regeneration cycle was evaluated. It is shown that the considered scheme of adsorption drying allows to provide rather stable average dew point of the dried compressed air without losses on the adsorbent purging.
Key words: compressor / adsorption desiccant / regeneration / numerical simulation of adsorption / desorption / cooling processes
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.