MATEC Web Conf.
Volume 313, 2020Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2020
|Number of page(s)||4|
|Published online||16 April 2020|
Design and strength analysis of C-hook for load using the finite element method
Technical university of Košice, Department of Mechanical Engineering, Department of Applied Mechanic and Mechanical Engineering, Letná 9, 042 00 Košice, Slovak Republic
2 Technical university of Košice, Department of Mechanical Engineering, Department of Construction and Transport Engineering, Letná 9, 042 00 Košice, Slovak Republic
* Corresponding author: email@example.com
The special type of C-hook is investigated in this paper. The C-hook is designed to carry a special load, where is not possible to use classical hooks or chain slings. The designed hook is consisted of two arms that ensure the stability of the load being carried. The finite element analysis is performed for the control of the stress and deformation state in the whole hook. The fatigue analysis is performed for the check of a lifetime of C-hook.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.