Issue |
MATEC Web Conf.
Volume 313, 2020
Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2020
|
|
---|---|---|
Article Number | 00030 | |
Number of page(s) | 6 | |
DOI | https://doi.org/10.1051/matecconf/202031300030 | |
Published online | 16 April 2020 |
Modelling of ensuring slope stability
Technical University of Kosice, Faculty of Civil Engineering, Vysokoškolská 4, 042 00 Kosice, Slovak Republic
* Corresponding author: slavka.harabinova@tuke.sk
Analysis and assessment of the slopes stability are an important in geotechnical engineering for all the times. The first and foremost requirement for the modelling and design of slope is to guarantee their safety and reliability during their service life. In analysing the overall stability of the ground, of soil or rock, all relevant modes of failure shall be taken into account. When modelling a slope stability processes, it should be considered: soil layering, occurrence and inclination of discontinuities, seepage and pore-water pressure distribution, shortand long-term stability, type of failure (circular or non-circular surface; toppling; flow), using of numerical methods. The paper deals with the modelling of ensuring slope stability.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.