| Issue |
MATEC Web Conf.
Volume 313, 2020
Dynamics of Civil Engineering and Transport Structures and Wind Engineering – DYN-WIND’2020
|
|
|---|---|---|
| Article Number | 00024 | |
| Number of page(s) | 9 | |
| DOI | https://doi.org/10.1051/matecconf/202031300024 | |
| Published online | 16 April 2020 | |
Optimal adjustment of FE model of concrete slab exposed to impact loading
Brno University of Technology, Faculty of Civil Engineering, Institute of Structural Mechanics, Veveří 331/95, 602 00 Brno, Czech Republic
* Corresponding author: jindra.d@fce.vutbr.cz
Numerical approach using FEM has been used to describe the behaviour of concrete slab exposed to impact loading. 3D parametrical numerical model has been created, and the influence of various parameters values on model response is being investigated. The analyses have been conducted using explicit numerical solver of commercially available software LS-Dyna. The optimal adjustment of the model has been determined.
© The Authors, published by EDP Sciences, 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.