MATEC Web Conf.
Volume 306, 2020The 6th International Conference on Mechatronics and Mechanical Engineering (ICMME 2019)
|Number of page(s)||4|
|Published online||14 January 2020|
Verification of Strain Transfer Characteristics of Distributed Surface-attached FBGs on Aircraft Wings
Key Laboratory of Micro-Inertial Instrument and Advanced Navigation Technology, Ministry of Education, School of Instrument Science and Engineering, Southeast University, 210096 Nanjing, China
* Corresponding author: firstname.lastname@example.org
In order to provide higher accuracy for transfer alignment on aircraft, a surface-attached FBGs is designed for distributed deformation measurement of aircraft wing. To verify the measurement accuracy of the surface-attached FBGs, a strain calibration method of the surface-attached FBGs applied with the wing strain measurement is proposed. Two Aluminium Alloy Test Plates(AATP) with different sizes were designed as the matrix material for tensile test. The test results show that AATP-A has better test effect. Through the two sets of tensile tests, the change of wavelength measured on the surface-attached FBGs is in good agreement with the change of strain value of strain gauge.The experimental results prove that the method based on surface-attached FBGs is feasible for the strain measurement of aircraft wing. The method is simple and reliable, which lays a foundation for the follow-up study of the full-field deformation measurement of aircraft wing.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.