MATEC Web Conf.
Volume 306, 2020The 6th International Conference on Mechatronics and Mechanical Engineering (ICMME 2019)
|Number of page(s)||5|
|Section||Power Electronics and Transmission Technology|
|Published online||14 January 2020|
Vibration Energy Harvest for Low Frequency using Double- piezoelectric Cantilever Beam
Department of Mechanical Engineering, Faculty of Engineering, King Mongkut’s University of Technology Thonburi, Bangkok, Thailand
* Corresponding author: firstname.lastname@example.org
This study introduces design methods of natural frequency for double-piezoelectric cantilever beams in order to absorb electricity from mechanical vibration. The natural frequencies of double cantilever beams are designed by quadratic equation such as 6.45 and 18.14 Hz. On the other hands, FEA is used to recheck the result. FEA simulation presents the natural frequencies such as 4.4614, 8.4793, 13.8020 and 25.1050 Hz. It works in low frequency and large bandwidth. The experimental results show the peak electric power at 5 and 22 Hz. The error may occur by stiffness of piezoelectric and effective of mounting position.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.