MATEC Web Conf.
Volume 306, 2020The 6th International Conference on Mechatronics and Mechanical Engineering (ICMME 2019)
|Number of page(s)||5|
|Section||Power Engineering and Applied Mechanics|
|Published online||14 January 2020|
Investigation on Dynamic Interaction of Multiple Clearance Joints for Flap Actuation System
Shaanxi Engineering Laboratory for Transmissions and Controls, Northwestern Polytechnical University Xi’an, 710072, China
* Corresponding author: firstname.lastname@example.org
A dynamic simulation model of the flap actuation system is developed in this paper to analyze the dynamic interaction behaviours of multiple clearance joints. The nonlinear contact force model and modified Coulomb friction model are adopted in the four clearance joints to capture their motion modes, including free flight mode, impact mode and continuous mode. The results show that there exists a strong dynamic interaction between different clearance joints and one impact motion mode in a joint will immediately affect other joints. And when the system reaches a stable state, the four clearance joints almost appears the similar tendency due to the rigid connection. Therefore, in order to accurately predict the dynamic responses of multibody system, it is essential for all joints to be modelled as imperfect ones.
© The Authors, published by EDP Sciences 2020
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.