| Issue |
MATEC Web Conf.
Volume 305, 2020
9th International Symposium on Occupational Health and Safety (SESAM 2019)
|
|
|---|---|---|
| Article Number | 00075 | |
| Number of page(s) | 7 | |
| DOI | https://doi.org/10.1051/matecconf/202030500075 | |
| Published online | 17 January 2020 | |
The analysis of the technological and professional danger factors specific to the works of exploitation of useful rocks from quarries, which can generate risk of accident and / or technological breakdown
1
National Institute for Research and Development in Mine Safety and Protection to Explosion – INSEMEX Petroşani, 32-34 G-ral Vasile Milea St., 332047 Petroşani, Hunedoara County, Romania
2
University of Petrosani, str. Universitatii 20, Petrosani, Romania.
* Corresponding author: attila.kovacs@insemex.ro
The exploitation of ore deposits or useful rocks, surface operations, implies the application of rigorous technologies regarding the configuration of the operating steps, the safety berms and the slopes, as well as the access ways to working front. The required measures to carry out drilling, shooting and evacuation activities involve both issues related to technological security and safety and health at work for the personnel involved in these activities, mining establishments being required to draw up appropriate instructions for the situation on the ground, covering both technological and SSH issues. In some situations, accidents or technological failures have occurred due to the failure of fully implement these provisions which, sometimes, have also resulted in human casualties. The paper aims at presenting 2 case studies to which INCD INSEMEX Petrosani carried out technical and scientific expertise for the produced events.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.