| Issue |
MATEC Web Conf.
Volume 305, 2020
9th International Symposium on Occupational Health and Safety (SESAM 2019)
|
|
|---|---|---|
| Article Number | 00038 | |
| Number of page(s) | 8 | |
| DOI | https://doi.org/10.1051/matecconf/202030500038 | |
| Published online | 17 January 2020 | |
Improvement of the procedure of new filter masks development
Dnipro University of Technology, 19, D. Yavornyts’kogo av., Dnipro, Ukraine
* Corresponding author: olnesterova1@rambler.ru
The purpose is to substantiate theoretically the design of elastomeric half mask and canister of respirator of long-term protection. To develop the models for theoretical calculations of protective properties of dust masks the theory of non-stationary filtration and hydro aerodynamics was applied. To develop the digital model of a head the downhill simplex method was applied reflecting separate face features considering sex or age; to determine the halfmask surface the free energy equation for bowed plate being described by two-dimension spline surface was used with its unknown coefficients determined by method of proportional parts based on three-dimension coordinates of anthropometric face features. The main anthropometric face features influencing halfmasks design were determined to develop polygonous 3D model of head. According to its determined basic coordinates the surface of halfmask was determined using method of interpolation. Considering the mathematical model describing the movement of dust flows near a halfmask and in canister the dependences of distribution of air flow speed in a canister of variable geometry were set and kinematic parameters of dust-laden airflow according to a canister volume were determined. Reasonable geometric parameters of canister were determined; transient modulation from filter to inlet valve hole is performed as a contractor.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.