MATEC Web Conf.
Volume 294, 20192nd International Scientific and Practical Conference “Energy-Optimal Technologies, Logistic and Safety on Transport” (EOT-2019)
|Number of page(s)||4|
|Published online||16 October 2019|
Selected aspects of proper integration between ERTMS/ETCS on-board and trackside devices.
Railway Research Institute, 04-275 Chłopickiego 50, Poland
* Corresponding author: firstname.lastname@example.org
Achieving the interoperability of the European rail system requires many measures to unify technical solutions as well as regulations in each Member State. However, there is a possibility of some incompatibilities between individual subsystems despite generating them in accordance with unified applicable requirements. It is possible that the interoperable rolling stock will not be able to move freely over the interoperable railway line due to some incompatibilities and differences in the versions of the installed firmware in the ERTMS/ETCS system devices. In connection with the above the correct integration of rail vehicles with track-side equipment should be examined by means of tests under operating conditions. The article presents compliance tests of the correct integration of the on-board subsystem with the track-side subsystem which are carried out by the Railway Research Institute.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.