| Issue |
MATEC Web Conf.
Volume 288, 2019
2019 5th Asia Conference on Mechanical Engineering and Aerospace Engineering (MEAE 2019)
|
|
|---|---|---|
| Article Number | 01005 | |
| Number of page(s) | 5 | |
| Section | Mechanical Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201928801005 | |
| Published online | 14 August 2019 | |
Research on Multi - axis Machining of Titanium Alloy Integral Impeller
Haier School, Qingdao Technical College 369 Qiantangjiang Road,Huangdao District,
Qingdao
266555
Shandong Province, P.R. China
* Corresponding author: 326027869@qq.com
Titanium alloy impeller is hard in material, with large curvature and complex shape, all these factors increase its manufacturing difficulty and machining cost. By formulating the corresponding process plan, the three-axis and five-axis NC machining are combined, and the phased processing mode is implemented. The cutting tools of different lengths are selected according to the needs, and the reasonable processing strategy and cutting parameters are selected. The experimental results show that the processing time of the titanium alloy impeller is reduced effectively, the cost of manufacturing is reduced, and the processing quality is improved.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.