MATEC Web Conf.
Volume 283, 2019The 2nd Franco-Chinese Acoustic Conference (FCAC 2018)
|Number of page(s)||4|
|Published online||28 June 2019|
The system design for calibrating acoustic Doppler current meter in the laboratory
1 Acoustic Science and Technology Laboratory, Harbin Engineering University, Harbin, China, 150001
2 College of Underwater Acoustic Engineering, Harbin Engineering University, Harbin, China, 150001
3 Key Laboratory of Marine Information Acquisition and Security (Harbin Engineering University), Ministry of Industry and Information, Harbin, China, 150001
* Corresponding author: firstname.lastname@example.org
The Acoustic Doppler Current meter is a most commonly device for the velocity measurement of the seawater in the ocean. We had designed an equipment to calibrate the Acoustic Doppler Current meter in the laboratory, which is mainly composed of a vertical circulating water tank and a system of Laser Doppler Velocimetry. The vertical circulating water tank is the key device of the calibration equipment. The optimization of flow field is carried out by the software, CFD. The optimization of structure intensity, modal analysis and low noise is carried out by the software, ANSYS. We had also used the propeller map to design the power section of the water tank. Through the comparison of the velocity of the flow between Acoustic Doppler Current meter and LDV at the same position in the working section of the water tank, the former can be calibrated, because the wavelength of optics is much less than that of acoustics in the water. After the experimental test, we found that when the fluid flows in the vertical circulating water tank, there exists no resonance phenomenon and the velocity of the flow in the working section is approximately proportional to the rotation speed of the propeller.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.