| Issue |
MATEC Web Conf.
Volume 279, 2019
10th International Scientific Conference Building Defects (Building Defects 2018)
|
|
|---|---|---|
| Article Number | 02006 | |
| Number of page(s) | 6 | |
| Section | Mechanical and Materials Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201927902006 | |
| Published online | 12 April 2019 | |
The non-stationary dynamic of a beam under the elastic-plastic impact of a conical indenter
Don State Technical University, pl. Gagarina, 1, Rostov-on-Don, 344010, Russia
Corresponding author: besk-an@ya.ru
The problem of impact interaction of a conical indenter with the surface of a steel beam under elastic-plastic deformation is considered. The analysis of the dynamic reaction of the beam to the impact is considered analytically and numerically. The analytical solution is based on the phenomenological model of conical indentation and the solution of wave equations of beam dynamics at impact. The numerical study of the indentation process was carried out using the ANSYS software. The dynamic response of the beam is analyzed for different geometric parameters and different values of strength characteristics. Such tasks are widely used in construction practice in the implementation of non-destructive methods of assessing the mechanical characteristics of structures.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.