MATEC Web Conf.
Volume 276, 2019International Conference on Advances in Civil and Environmental Engineering (ICAnCEE 2018)
|Number of page(s)||6|
|Published online||15 March 2019|
Study of cold formed steel beam column joint to resist lateral load
Department of Civil Engineering, Institut Teknologi Nasional Bandung, Bandung, Indonesia
* Corresponding author: email@example.com
Cold Formed Steel (CFS) is one of the materials that recently used in building structures. There are many advantages of CFS compared with other materials, such as lightweight, high tensile strength, and fast construction. Hollow Structural Sections (HSS) is the most commonly used as beam and column CFS sections. The purposes of this study are determining the behavior and capacity of CFS beam column joint under lateral load with manual calculation, numerical analysis and experimental. The test specimens used 1 mm thick, 4x4cm HSS for column and 2x4cm HSS for beam. Beam and column connected by two single angle plates placed above and below the beam sides. Both parallel and staggered fastener configurations used in this experiment. Four 4 mm diameter bolts used in this connection. Monotonic static loading applied on beam for modelling the lateral load. The experimental results show the behavior and the capacity of the beam column joint with parallel fastener configurations. The numerical results show that the staggered fastener configuration has better performance compared with the parallel fastener configuration. The CFS beam column joint are adequate to resist the lateral load and feasible to be apply as structural components in building structures.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.