Issue |
MATEC Web Conf.
Volume 276, 2019
International Conference on Advances in Civil and Environmental Engineering (ICAnCEE 2018)
|
|
---|---|---|
Article Number | 01020 | |
Number of page(s) | 7 | |
Section | Structural Engineering | |
DOI | https://doi.org/10.1051/matecconf/201927601020 | |
Published online | 15 March 2019 |
Properties of concrete using crumb rubber and rice husk ash as additive for rigid pavement material in peat environment
1 Department of Civil Engineering, Universitas Riau, Pekanbaru, Indonesia
2 Head of Structural Engineering Laboratory, Universitas Riau, Pekanbaru, Indonesia
* Corresponding author: habib.abdurrahman@student.unri.ac.id
A waste tyre is an inorganic rubber waste that is difficult to decompose since it has a complex structure. Utilization of waste tyre as a material to improve elastic properties in rigid pavement construction in peat environment has not investigated yet. The rigid pavement in peat environment needs to be impermeable and posses high elastic properties. This paper presents mechanical properties and porosity of concrete incorporating crumb rubber as an additive in concrete mixture with a variation of 10%, 20%, and 30% by fine aggregates volume. Rice husk ash is added as a filler in various percentage (5%, 10%, and 15%) by cement volume in the mixture. Concrete is produced with a target strength of 35 MPa. In this research, the OPC concrete mix is used as a control mix. Mechanical properties taken were the compressive strength, tensile strength, flexural strength, modulus of elasticity, and porosity at 7, 14 and 28 days. Results show that crumb rubber and rice husk ash addition increases compressive strength, improves elastic properties, i.e., tensile strength, flexural strength, modulus of elasticity, and reduce the porosity of the concrete. It can be concluded that the crumb rubber is potential as an environmentally friendly additive as rigid pavement material in peat environment.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.