Issue |
MATEC Web Conf.
Volume 275, 2019
1st International Conference on Advances in Civil Engineering and Materials (ACEM1) and 1st World Symposium on Sustainable Bio-composite Materials and Structures (SBMS1) (ACEM2018 and SBMS1)
|
|
---|---|---|
Article Number | 03003 | |
Number of page(s) | 6 | |
Section | Geotechnical and Tunnel Engineering | |
DOI | https://doi.org/10.1051/matecconf/201927503003 | |
Published online | 13 March 2019 |
Stress and Deformation Property of Geomembrane Surface Barrier for High Rock-fill Dam
College of Water Conservancy and Hydropower Engineering, Hohai University, Nanjing, China
* Corresponding author: wuhaimin@hhu.edu.cn
Based on the direct shear test results of interface between a composite geomembrane and cushion material, nonlinear elastic, perfectly plastic model was used to describe the interface behaviors. The interface model was incorporated into the Geogrid element of a fast Lagrange analysis of continua in three dimensions (FLAC3D) procedure through a user-defined program in the FISH. Then a geomembrane surfaced rock-fill dam on thick pervious foundation was numerically analyzed using the incorporated model. The numerical results showed that only small tension deformation can be found in the most area of geomembrane on the dam surface. However, large tension deformation of geomembrane appeared close to the anchorage in the peripheral zone of the barrier. The anchorage structure of geomembrane in this area should be carefully designed to avoid tension failure of geomembrane.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.