| Issue |
MATEC Web Conf.
Volume 267, 2019
2018 2nd AASRI International Conference on Intelligent Systems and Control (ISC 2018)
|
|
|---|---|---|
| Article Number | 03001 | |
| Number of page(s) | 4 | |
| Section | Biological and Chemical Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201926703001 | |
| Published online | 11 February 2019 | |
Determination of the Correction Factor for Dinalmefene Hydrochloride in Nalmefene Hydrochloride Injection
1
Changchun University of Chinese Medicine
2
Changchun University of Technology
3
Aviation University Air Force
* Corresponding author: Duan Minghua, duanduan-2007@163.com
Objective: To calculate the detection correction factor for the impurity, that is, the dinalmefene hydrochloride in nalmefene hydrochloride injection. Methods: High performance liquid chromatography (HPLC) is used to analyze the impurities of nalmefene hydrochloride easily produced during storage, and the impurity is determined and correction factor is calculated for the known the dinalmefene hydrochloride. According to the standard curve method, the sample concentration is selected between the detection limit and the limit of quantification, and the standard curve is prepared. The correction factor is then calculated according to the slope of the standard curve. Results: finally, the correction factor for dinalmefene hydrochloride is 0.22. Conclusions: the correction factor calculated by the standard curve method is accurate and reliable, and can be used for impurity detection of nalmefene hydrochloride injection.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.