Issue |
MATEC Web Conf.
Volume 264, 2019
2nd International Conference on Composite Material, Polymer Science and Engineering (CMPSE2018)
|
|
---|---|---|
Article Number | 01005 | |
Number of page(s) | 4 | |
Section | Mechanical Properties (Corrosion, Damage Analysis, Strength and Wear) | |
DOI | https://doi.org/10.1051/matecconf/201926401005 | |
Published online | 30 January 2019 |
Influence of groove shape on rolling contact fatigue of PEEK-PTFE hybrid radial bearings in dry conditions
1
University of Toyama, Gofuku 3190,
Toyama,
930-8555,
Japan
2
Kashima Plastic Bearings Corporation, 2-9-21 Himesato, Nishiyodogawa-ku,
Osaka,
555-0025,
Japan
a Corresponding author: kida@eng.u-toyama.ac.jp
In this study, rolling contact fatigue (RCF) tests were performed in order to investigate the effect of groove radius on the life of PEEK-PTFE hybrid radial bearings. Furthermore, solid state NMR spectroscopy was performed in order to investigate the molecular structure of PEEK. It was found that groove radius shape was related to limitations of the bearings, and the molecular structure of the PEEK was not changed by the temperature rise in this test. Furthermore, thermal failure of the PEEK was not affected by oxidation during RCF test.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.