MATEC Web Conf.
Volume 263, 2019Research, Production and Use of Steel Ropes, Conveyors and Hoisting Machines (VVaPOL 2018)
|Number of page(s)||8|
|Published online||30 January 2019|
Assessment of the transverse roughness of the thin-walled cooler for the robot control system made using CAM programming
Technical University of Kosice, Faculty Manufacturing and Technologies, with seat in Presov,
* Corresponding author: firstname.lastname@example.org
The article deals with design and design of a thin-walled heat sink for the robot control system, the measurement of the transverse roughness of the touch surfaces and the programming procedure in Autodesk Inventor 2019 software. In this software, a design of the 3D model of the heat sink generated based on power supply and NC code generation for the Fanuc control system. The production it-self carried out on the CNC Vertical Machining Center Pinnacle 2100 with this control system. The longitudinal surface roughness was measured with a Mi-tutoyo SJ 400 dredger and the measurement result was the maximum Ra = 0.69 μm and Rz = 4.1 μμm.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.