Issue |
MATEC Web Conf.
Volume 262, 2019
64 Scientific Conference of the Committee for Civil Engineering of the Polish Academy of Sciences and the Science Committee of the Polish Association of Civil Engineers (PZITB) (KRYNICA 2018)
|
|
---|---|---|
Article Number | 05008 | |
Number of page(s) | 7 | |
Section | Transportation Engineering | |
DOI | https://doi.org/10.1051/matecconf/201926205008 | |
Published online | 30 January 2019 |
Modelling the critical concentration of mixed filler in mastic with synthetic wax
Kielce University of Technology, Faculty of Civil Engineering and Architecture, Al. Tysiąclecia Państwa Polskiego 7, Poland
* Corresponding author: gmazurek@tu.kielce.pl
This article presents the results of tests of mastic containing mixed filler (limestone dust/hydrated lime) and Fisher-Tropsch synthetic wax. Synthetic wax content was controlled up to 3% (w/w). The ratio of filler in the bitumen was from 0.5 to 3 (w/w), with hydrated lime content of up to 30% w/w. The rheological properties of different mastic compositions were determined with a rheometer equipped with two parallel plates at 60°C using oscillating load. The primary purpose of the article was to determine the nature of mastic stiffness changes in the context of using hydrated lime and synthetic wax as the filler. Consequently, the article proposes a method for evaluation of the critical value of the filler phase in the phase of bitumen modified with synthetic wax. The proposed model of the mathematical function was used to determine the nature of mastic structuring throughout the range of the experiment. The model was also used to determine the critical concentration of the filler in the bitumen phase. It was demonstrated that below the critical filler concentration the mastic behaved in a significantly different manner from the behaviour observed above this critical concentration. When the critical concentration of the filler was exceeded, it resulted in an excessive increase of mastic stiffness, which was considered in the model.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.