MATEC Web Conf.
Volume 262, 201964 Scientific Conference of the Committee for Civil Engineering of the Polish Academy of Sciences and the Science Committee of the Polish Association of Civil Engineers (PZITB) (KRYNICA 2018)
|Number of page(s)||8|
|Published online||30 January 2019|
Stability estimation of slopes with determined slip surface by the MSTAB-3D method based on sliding body limit equilibrium analysis
Faculty of Civil Engineering and Architecture, Opole University of Technology, 45-061 Opole, ul. Katowicka 48, Poland
* Corresponding author: firstname.lastname@example.org
The method developed for this study, established on the premises of the limit equilibrium flat analysis for a spatial solution, is a modification of the STAB-3D method, previously described by the author. It combines the analyses methods of 2D slices of flat cross–sections with the spatial analyses methodology rooted in a specific breakdown of a landslide sliding body into 3D elements assuming some simplifying solution. However, this method is solely applicable in case of a landslide failure with a stipulated slip surface and with a consistent decline of a determined slide direction. Such a method was developed in the article published earlier, which provided then its basic assumptions and the equilibrium formulations. The following publication thereof, presents overall suppositions for this method as well as its modification involving the resultant forces brought to the equilibrium with the generalized slide direction. Apart from that, a comparative analysis was carried out on the impact of this modification applicability of the obtained results with regard to the STAB-3D method. The algorithm was also presented concerning the modified method with its results being compared to a couple of selected methods LEM (limit equilibrium method). The undertaken analysis reveals that the modified MSTAB-3D method determines stability indicators that are very similar to its earlier version. Moreover, the results occur to be also approximating the values obtained in the course of other methods with regard to the flat cross-section analysis.
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.