MATEC Web Conf.
Volume 258, 2019International Conference on Sustainable Civil Engineering Structures and Construction Materials (SCESCM 2018)
|Number of page(s)||6|
|Section||Hybrid and Composite Structures, Smart Materials and Structures, Special Structures|
|Published online||25 January 2019|
Shear capacity of reinforced concrete beams strengthened with web side bonded CFRP sheets
Civil Engineering Department, Engineering Faculty, Andalas University, 25163 Padang, Indonesia
* Corresponding author: email@example.com
The shear capacity of reinforced concrete beams strengthened with web side bonded carbon fiber-reinforced polymer (CFRP) sheets was measured experimentally. Nine reinforced concrete beams without stirrups; three control beams and six beams strengthened with minimal application of web side bonded CFRP sheets, were tested. The test variables were ratio of longitudinal reinforcement (1%, 1.4%, and 2.4%) and angle of application of CFRP sheets (450 and 900). The test results show that reinforced concrete beams strengthened with web side bonded CFRP sheets have higher shear capacity compared to the control beams. Shear capacity of strengthened beams with 450 angle of application of CFRP sheets is similar to that of beams strengthened with 900 angles. Beams with 1% of longitudinal reinforcement ratio failed in flexural mode indicated by concrete crushing in compression zone while beams with higher longitudinal reinforcement ratio (1.4% and 2.4%) failed in brittle mode as indicated by delamination of the concrete cover.
© The Authors, published by EDP Sciences, 2019
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.