Issue |
MATEC Web Conf.
Volume 254, 2019
XXIII Polish-Slovak Scientific Conference on Machine Modelling and Simulations (MMS 2018)
|
|
---|---|---|
Article Number | 02040 | |
Number of page(s) | 8 | |
Section | Modelling and Simulation, Structural Optimization | |
DOI | https://doi.org/10.1051/matecconf/201925402040 | |
Published online | 15 January 2019 |
Kinematic analysis of Stirling engine
Faculty of industrial Technologies in Púchov, Alexander Dubček University of Trenčín, I. Krasku 491/30, 020 01 Púchov, Slovac Republic
* Corresponding author: jan.vavro@fpt.tnuni.sk
The submitted paper presents a kinematic analysis of Stirling engine by the vector method. Position equations are written for various points of the mechanism, and values of velocity and acceleration are obtained from derivation of the equations, depending on time. Equations in matrix form are solved by means of the Matlab program. Graphic dependences of kinematic magnitudes of some points are given in dependence on the angle of rotation of the drive member. Position equations are utilised for the animation of the mechanism. The computational model of the Stirling engine was created in the SolidWorks software program.
Key words: kinematic analysis / planar mechanism / Matlab program / SolidWorks software
© The Authors, published by EDP Sciences, 2019
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.