| Issue |
MATEC Web Conf.
Volume 234, 2018
BulTrans-2018 – 10th International Scientific Conference on Aeronautics, Automotive and Railway Engineering and Technologies
|
|
|---|---|---|
| Article Number | 04003 | |
| Number of page(s) | 6 | |
| Section | Dynamics, Strength and Reliability of Vehicles | |
| DOI | https://doi.org/10.1051/matecconf/201823404003 | |
| Published online | 21 November 2018 | |
Experimental research of steel-concrete load bearing components of bridge column piers
1 Kharkov National Automobile and Highway University, Road Building and Maintenance Department, 25 Yaroslava Mudrogo st., 61002 Kharkiv, Ukraine
2 Kharkov National Automobile and Highway University, Department of Bridges, Constructions and Structural Mechanics, 25 Yaroslava Mudrogo st., 61002 Kharkiv, Ukraine
3 Ukrainian State University of Railway Transport, Structural Mechanics and Hydraulics Department, 7 Feierbakh Sq., Kharkiv, Ukraine
* Corresponding author: iglema@meta,ua
A new constructive design of a bridge column pier, which is a load-bearing component of bridges and overpasses as well as of complex multilevel interchanges underlying a transport infrastructure, is proposed. The design is based on a steel mesh casing that is made from a solid-web plate by means of cutting meshes and further expansion of the solid-web plate using non-waste technology. Experimental research data on the bearing capacity and deformability of the cylindrical steel-concrete load bearing components of bridge column piers are provided. They are compared with research data on load bearing components having a solid casing. To make the experimental picture complete, analogous research data on cylindrical concrete load bearing components are provided. This experiment includes static and low-cycle loadings of samples under axial compression mentioned above. On the basis of the information obtained, the effort and travel fields are formed, the critical forces of structure buckling are determined. The analysis of the rationality of the cylindrical steel-concrete load bearing component of bridge column piers is carried out, using the experimental research data. To verify the research data, which are obtained in the course of the study of the critical forces of cylindrical steel-concrete load bearing component buckling, the experimental results are compared with theoretical ones.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.