Issue |
MATEC Web Conf.
Volume 232, 2018
2018 2nd International Conference on Electronic Information Technology and Computer Engineering (EITCE 2018)
|
|
---|---|---|
Article Number | 04077 | |
Number of page(s) | 4 | |
Section | Circuit Simulation, Electric Modules and Displacement Sensor | |
DOI | https://doi.org/10.1051/matecconf/201823204077 | |
Published online | 19 November 2018 |
A reference current source with a low temperature coefficient
1
College of Information Science and Engineering, Shenyang University of Technology, China
2
College of Information Science and Engineering, Shenyang University of Technology, China
3
College of Information Science and Engineering, Shenyang University of Technology, China
* Corresponding author: a Dong Yang Han: 862740050@qq.com
In view of the high demand for low temperature coefficient reference current sources in integrated circuits, the advantages and disadvantages of several typical reference current sources in circuit structure and temperature characteristics are compared. In this paper, a low temperature coefficient reference current source is designed. Based on Hua Hong HHNECGE 0.35um process, the output current is 0.4uA, the temperature range is -40°C-125°C, and the temperature coefficient is 7.6ppm/°C under typical process angle. Other processes The temperature coefficient under the corner is at 10ppm/°C.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.