Issue |
MATEC Web Conf.
Volume 232, 2018
2018 2nd International Conference on Electronic Information Technology and Computer Engineering (EITCE 2018)
|
|
---|---|---|
Article Number | 04051 | |
Number of page(s) | 5 | |
Section | Circuit Simulation, Electric Modules and Displacement Sensor | |
DOI | https://doi.org/10.1051/matecconf/201823204051 | |
Published online | 19 November 2018 |
EPS Sensor Torsion Bar Design and Structure Analysis
1
Hulunbuir University Mining College, Inner Mongolia Hulunbuir, China
2
Hella Shanghai Electronics Co.,Ltd., Shanghai, China
a Corresponding author: 32577140@qq.com
Torsion bar design is very important on Electrical power steering(EPS) development. The mathematical model and structure for torsion bar are developed, and the torsion bar outer spline is cancelled based on the automotive parameters. This kind of structure leads to cost down and time saving on torsion bar manufacturing process. The 3D model and finite element on sub-EPS(torsion bar, input shaft, output shaft) are developed, and then do the contact nonlinear analysis based on interference between torsion bar and output shaft. The EPS structure and test reliability according to function test and durability test are verified and the test results are passed.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.