Issue |
MATEC Web Conf.
Volume 232, 2018
2018 2nd International Conference on Electronic Information Technology and Computer Engineering (EITCE 2018)
|
|
---|---|---|
Article Number | 04039 | |
Number of page(s) | 6 | |
Section | Circuit Simulation, Electric Modules and Displacement Sensor | |
DOI | https://doi.org/10.1051/matecconf/201823204039 | |
Published online | 19 November 2018 |
Capacity Analysis of Distributed Antenna Systems with Beamforming
College of Computer and Information, Hohai University, Nanjing 211100, China
* Corresponding author: aMeiyan Ju: jmy@hhu.edu.cn
Distributed antenna systems (DASs) can reduce the access distance, increase system capacity and improve system performance compared with conventional centralized multiple antenna systems. In this paper, the system capacity of downlink DAS with beamforming is investigated. The mathematical expression of system capacity is derived over the composite channel including Rayleigh fading, shadowing and path loss. At the same time, the interference from other APs is also considered for the studied AP. Numerical methods including Gauss-Hermite integral and composite Simpson’s rule are used to compute the system capacity of DAS under different MS distributions. Numerical results verify the precision of the mathematical analysis of system capacity by comparing Monte-Carlo simulation results. The results also show interference among APs shouldn’t be ignored when APs are close to each other or there are many APs.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.