MATEC Web Conf.
Volume 232, 20182018 2nd International Conference on Electronic Information Technology and Computer Engineering (EITCE 2018)
|Number of page(s)||4|
|Section||Algorithm Study and Mathematical Application|
|Published online||19 November 2018|
Numerical simulation of shallow square boxes with flanges based on Dynaform
Yibin Vocational and Technical College, Department of Modern manufacturing, 644003 Sichuan Province, China
a Corresponding author: email@example.com
In this work, Numerical simulations based on finite element method have been carried out to study the effect of important process parameters on formability of AA5182 alloy sheets. The blank holder force between 0.5KN and 3KN and friction coefficient(μ) between 0.05 and 0.20, which resulted in successful drawing, was evaluated. Maximum percentage thinning has always been obtained at the conjunction of corner and bottom. The maximum thinning rate was nearly 20% for a maximum holder force of 3KN. Friction coefficient simulations are shown that as friction coefficient increasing, the thinning rate becomes larger and low friction coefficient is beneficial to the sheet forming.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.