MATEC Web Conf.
Volume 232, 20182018 2nd International Conference on Electronic Information Technology and Computer Engineering (EITCE 2018)
|Number of page(s)||5|
|Section||Algorithm Study and Mathematical Application|
|Published online||19 November 2018|
Design and Implementation of a Fully Automatic Assembling System for Automobile Fuel Tank Overturn Valve
School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200072, China
At present, at least one or two overturn valves are required in each automobile production process. However, the production and assembly of overturn valve is still in the stage of manual assembly, which leads to low production efficiency. This paper mainly designs a fully automatic assembly system based on the structure of the overturn valve. The automatic assembly system includes loading, assembly, transportation of blanks and other work stations, and automatic assembly based on the PLC control system. At the same time, the human interaction page touch screen is used for data monitoring and parameter setting. The experimental results show that the assembly system can complete the automatic assembly of the overturning valve of the fuel tank stably and reliably
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.