Issue |
MATEC Web Conf.
Volume 232, 2018
2018 2nd International Conference on Electronic Information Technology and Computer Engineering (EITCE 2018)
|
|
---|---|---|
Article Number | 02005 | |
Number of page(s) | 5 | |
Section | 3D Images Reconstruction and Virtual System | |
DOI | https://doi.org/10.1051/matecconf/201823202005 | |
Published online | 19 November 2018 |
Characteristics Analysis and Modelling of a Pneumatic Underwater Launching System
1
Wuhan Second Ship Design and Research Institute, Wuhan, China
2
Wuhan Maritime Communications Research Institute, Wuhan, China
a Corresponding author: libinzju@sina.com, guosongjie555@163.com, 93320399@qq.com, lin1985101@sina.com, neilwong2011@163.com
Comprehensive characteristics of a pneumatic underwater launching system were analyzed and the simulation was carried out by simulink. The components of the pneumatic underwater launching system were introduced, and the theoretical calculation formula for the system was derived. A rated pressure of 3.5MPa and 5MPa was offered in the numerical work. Analyses in different piston height show good behaviors: Proper increase of piston-initial accumulator pressure is beneficial to reduce hydrodynamic noise, choose the appropriate pressure of accumulator. The hydrodynamic noise of the system can be significantly reduced by optimizing the structure of the double-acting cylinder, increasing the height of the piston and improving the structure of the piston.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.