Issue |
MATEC Web Conf.
Volume 228, 2018
2018 3rd International Conference on Circuits and Systems (CAS 2018)
|
|
---|---|---|
Article Number | 03011 | |
Number of page(s) | 4 | |
Section | Circuits, Control and Mechatronic Engineering | |
DOI | https://doi.org/10.1051/matecconf/201822803011 | |
Published online | 14 November 2018 |
Design and Simulation of a Tunable Stripline Wideband Coupler
School of Electronics & Communication Engineering, Guangdong Mechanical & Electrical College, Guangzhou 510515, China
The basic theory of coupler is introduced, and a tunable strip-line wideband coupler is designed by using radio-frequency/microwave software which is named ADS on the basis of theoretical calculations and analysis. The broadband coupler can be adjusted appropriately in different frequency regions by using a tunable band line. It has a wide bandwidth of 2G~4G, excellent return loss of (>30.5) dB, stable coupling coefficient of (9.85~10.81) dB, and high isolation of (>20.08) dB, the straight-through pass-band transmission coefficient of (0.41~0.62) dB. The coupler has high power tolerance and small size. It can reduce design costs by used in communication systems.
Key words: Tunable / Stripline / Wideband coupler / Return loss / Coupling coefficient / Simulation and analysis
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.