Issue |
MATEC Web Conf.
Volume 225, 2018
UTP-UMP-VIT Symposium on Energy Systems 2018 (SES 2018)
|
|
---|---|---|
Article Number | 02021 | |
Number of page(s) | 8 | |
Section | Energy Enhancement and Optimization | |
DOI | https://doi.org/10.1051/matecconf/201822502021 | |
Published online | 05 November 2018 |
Construct Coil Probe Using GMR Sensor for Eddy Current Testing
1
Faculty of Engineering Technology, Universiti Malaysia Pahang, Kuantan 23600, Malaysia.
2
Faculty of Electrical Engineering, Universiti Malaysia Pahang, Pekan 26600, Malaysia
3
Faculty of Electrical & Automation Engineering Technology. TATI University College, Kemaman
* Corresponding author: dramaide@yahoo.com
Eddy current testing is a widely applied non-destructive technique in different sections of industries. Nowadays eddy current testing is an accurate, widely used and well-understood inspection technique, particularly in the aircraft and nuclear industries. The main purpose of this paper is to construct an eddy current probe by using transmission coil and using a Giant Magneto resistance (GMR) sensor for detection medium. This probe only use a magnetic field to operational in detection of flaws. A transmission coil is an object made from a material that is magnetized and creates its own persistent magnetic field. A GMR-coil probe has been used to inspect two different material of calibration block. Experimental results obtained by scanning A GMR-coil probe over Brass calibration block has 10 slots with different depth from 0.5mm to 5mm and mild steel has 8 slots with different depth from 0.5mm to 4mm are presented. The result prove that GMR-coil probe that operated using a magnetic field and sensor more effective on ferromagnetic material.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.