MATEC Web Conf.
Volume 210, 201822nd International Conference on Circuits, Systems, Communications and Computers (CSCC 2018)
|Number of page(s)||4|
|Published online||05 October 2018|
The influence of the mold quality and injection pressure on the product quality
Tomas Bata University in Zlín, Nam. T.G. Masaryka 5555, 760 01 Zlín, Czech Republic
2 TREVOS, a. s., R&D Department, Masov 34, 511 01 Turnov, Czech Republic
* Corresponding author: firstname.lastname@example.org
This study deals with the study of the influence of injection pressure parameters and the quality of the surface of the mold cavity on the final quality of the product surface. This issue represents a significant problem, especially in the area of the mold production and the determination of its product price. The final price is closely linked just to the surface quality. This study is concentrated on three basic qualities of machining, namely Ra 0.1, Ra 0.8 and Ra 1.6. The possibilities of the replication of the surface of the mold cavity are then combined with various values of injection pressure, which has also the inconsiderable influence on surface replication. Total results show the influence of injection pressure and its most suitable value for obtaining the best identities of both surfaces.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.