| Issue |
MATEC Web Conf.
Volume 208, 2018
2018 3rd International Conference on Measurement Instrumentation and Electronics (ICMIE 2018)
|
|
|---|---|---|
| Article Number | 04002 | |
| Number of page(s) | 5 | |
| Section | Power Engineering and System Modeling | |
| DOI | https://doi.org/10.1051/matecconf/201820804002 | |
| Published online | 26 September 2018 | |
Defining the power system load frequency static response slope based on transient synchrophasor data
Automated Electrical Systems Department, Ural Federal University named after the first President of Russia B.N. Yeltsin, 19 Mira St., Yekaterinburg, Russia
The method is proposed for defining the power system load frequency static response based on synchrophasor measurements during transients accompanied by frequency deviations. The method was successfully validated involving four events resulting in frequency deviations in the Northern part of Tyumen region of up to 0.06 Hz magnitude and recorded by means of the System operator WAMS.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.