MATEC Web Conf.
Volume 206, 20182018 The 3rd International Conference on Civil Engineering and Materials Science (ICCEMS 2018)
|Number of page(s)||4|
|Section||Material Science and Engineering|
|Published online||19 September 2018|
Effect of Time and Temperature on the Aging of 791-H SBS Modifier
School of Civil Engineering, Southwest Jiaotong Univ., Highway Engineering Key Laboratory of Sichuan Province, Chengdu China
2 Sichuan Provincial Transport Department Highway Planning, Survey, Design and Research Institute, Chengdu China
The effects of time and temperature level on the aging of the 791-H SBS modifier have been investigated through experimental study. A series of Thin Film Oven (TFO) Test was conducted at the temperature of 100°C and 163°C and time of 1, 2, 5 and 10h. The changes in the chemical composition due to oxidative aging are detected by Fourier Transform Infrared Spectroscopy (FTIR) test. The results show that the visual observation of SBS after aging within 10h is almost unchanged when the aging temperature is 100°C. At 163°C within 1-2h aging, the SBS particles gradually softened and become slightly bonded to each other; at the same temperature after 5h of aging, the particles of SBS became yellow. The result from FTIR test shows that temperature is an important factor in the aging of SBS modifier and its effect on the aging of SBS modifier is much greater than that of aging time.
© The Authors, published by EDP Sciences, 2018
This is an open access article distributed under the terms of the Creative Commons Attribution License 4.0 (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.