Issue |
MATEC Web Conf.
Volume 203, 2018
International Conference on Civil, Offshore & Environmental Engineering 2018 (ICCOEE 2018)
|
|
---|---|---|
Article Number | 04001 | |
Number of page(s) | 7 | |
Section | Geotechnical Engineering | |
DOI | https://doi.org/10.1051/matecconf/201820304001 | |
Published online | 17 September 2018 |
Preliminary View of a Smart Technique for Materials Testing in the Laboratory using FBG Sensor
Universiti Teknologi PETRONAS, Civil and Environmental Engineering Department,
32610 Bandar Seri Iskandar Perak,
Malaysia
* Corresponding author: balarabe_16005697@utp.edu.my
Simple experiments for calibrating Fibre Bragg Grating (FBG) in order to measure strain and temperature have been successfully demonstrated in this study. This will allow convenient use of FBG sensor in the laboratory for measuring quantities. Linear curve fittings were employed for both the strain and temperature, and R2 values are determined respectively. The result showed a perfect correlation between FBG, strain and temperature. The approach can be employed with ease, simplicity in an inexpensive manner, in order harness the advantages offered by FBG sensors such as accuracy, precision, speed and high resolution.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.