MATEC Web Conf.
Volume 197, 2018The 3rd Annual Applied Science and Engineering Conference (AASEC 2018)
|Number of page(s)||7|
|Published online||12 September 2018|
Analysis of the influence of the barrier against a range of active and passive RFID and its performance
State Polytechnic of Malang, Department of Electrical Engineering, Jl. Soekarno-Hatta No. 9, Malang 65141, Indonesia
* Corresponding author: email@example.com
RFID is classified into 2 based on its power supply i.e. passive RFID and active RFID. The purpose of this research is to know the influence of the media barrier in the form of iron, aluminium, marble, glass, wood, and acrylic, to prove the influence of position of laying on tags that tilted and upright against a range of active RFID readout and passive. Knowing the shape of the radiation pattern between active and passive RFID. The most media give influence on the range of active RFID is aluminium which resulted 2.38 and the lowest media gives influence on the range of active RFID is wood which resulted 10.21 m. Whereas in passive RFID, the most media give influence on the range of passive RFID is Aluminium which resulted 0 cm and the lowest media give influence on the range of passive RFID is acrylic which resulted 42.7 cm. in testing about the influence of laying on the position of the tags obtained that in Active RFID or RFID passive can be inferred that the laying position tags give influence on the range of readings on the position of the direction of Y,-Y,-X. X.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.