| Issue |
MATEC Web Conf.
Volume 196, 2018
XXVII R-S-P Seminar, Theoretical Foundation of Civil Engineering (27RSP) (TFoCE 2018)
|
|
|---|---|---|
| Article Number | 04033 | |
| Number of page(s) | 7 | |
| Section | Building Materials, Technologies, Organization and Management in Construction | |
| DOI | https://doi.org/10.1051/matecconf/201819604033 | |
| Published online | 03 September 2018 | |
Synthesis of High-Precision Hydraulic Control Systems of an Excavator
Samara State Technical University,
194, Molodogvardeyskaya St.,
443001,
Samara,
Russia
*
Corresponding author: iv_dudanov@mail.ru
Practical implementation of the program controlling the movement of the excavator’s working tool (including the use of satellite navigation system) imposes stringent requirements on the dynamic and static accuracy of automatic control systems for the hydraulic excavator’s operating mechanisms, in conditions of non-stationary parameters of these mechanisms as control objects. The authors describe the effective solution of this problem by implementing structural synthesis of each servo hydraulic drive as a multi-loop system with one measured coordinate (MLSOMC). The EO-4121 excavator with four hydraulic drives (rotary platform, boom, arm and ladle) was used as an example to demonstrate that the implementation of three circuits in the multi-loop system with one measured coordinate in each of these drives with typical PID-controllers allows to ensure the robustness of the ACS for known uncertainties, as well as the required rates of control quality in static and dynamic modes.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.