Issue |
MATEC Web Conf.
Volume 193, 2018
International Scientific Conference Environmental Science for Construction Industry – ESCI 2018
|
|
---|---|---|
Article Number | 03029 | |
Number of page(s) | 7 | |
Section | Environmentally-Friendly Building Construction | |
DOI | https://doi.org/10.1051/matecconf/201819303029 | |
Published online | 20 August 2018 |
Comparison of the stress and strain intensity factors for the corner area of the structure boundary
Moscow State University of Civil Engineering, Yaroslavskoe shosse, 26, Moscow, 129337, Russia
* Corresponding author: lfrishter@mail.ru
The stress-strain state of structures in areas with corner cut-outs and cuts of boundaries features the occurrence of areas of stress concentration and requires assessment of strength and reliability of facilities, which is a relevant task in engineering practice. Theoretical analysis of stress-strain state (SSS) of corner cut-outs zones of the area boundary is reduced to the study of singular solutions of the elasticity theory problem with exponential features. At that, the concept of stress or strain concentration in an irregular point of the area boundary is meaningless. This paper considers the stress-strain state in the vicinity of the top of the corner cut-out of the flat area boundary, which is recorded using the intensity factors as limit values of stresses and strains. We give two approaches for obtaining the limit values for stress and strain in the vicinity of an irregular point of the plane area boundary using the stress intensity factors and the strain intensity factors. The stress-strain state in the corner cut-outs zone of structures and buildings boundary recorded in the form of limit values of stresses and strains may further be used to determine and record the influence of changing the factors of intensity of stresses and strains on SSS of structures, which is a separate task of solid mechanics. The difference in the expressions of stresses and displacements obtained for limit values of stresses and strains determines practical significance of the work when carrying out experiments and at determination of critical values of stresses and strains.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.