Issue |
MATEC Web Conf.
Volume 188, 2018
5th International Conference of Engineering Against Failure (ICEAF-V 2018)
|
|
---|---|---|
Article Number | 01024 | |
Number of page(s) | 7 | |
Section | Composite Materials: Characterization, Mechanical Behavior and Modeling, Advanced Manufacturing Techniques, Multifunctionality | |
DOI | https://doi.org/10.1051/matecconf/201818801024 | |
Published online | 07 August 2018 |
Automated fabrication of hybrid thermoplastic prepreg material to be processed by In-Situ Consolidation Automated Fiber Placement process
NOVOTECH Aerospace Advanced Technology Srl,
80125
Piazzale D'Annunzio 15,
Naples,
Italy
* Corresponding author: vincenzo.iannone@novotech.it
This work deals with the fabrication of an innovative hybrid thermoplastic prepreg by continuous hot forming process. The material, suitable also for Automated Fiber Placement process, is produced through a consolidation of commercial PEEK-Carbon Fiber prepreg sandwiched between two amorphous PEI films. Consolidation is performed by a purpose-designed automated prototype equipment operating on defined pressure and thermal cycles. Then preliminary tests on first trials produced were carried out. These activities have been developed in the frame of the NHYTE project, a Research and Innovation Action funded by the European Union's H2020 framework programme, under Grant Agreement No 723309 NOVOTECH acting as Coordinator presents this paper on behalf of all Partners of the project. The proof of NHYTE project concept is the manufacturing of a fastener free and high performing fuselage portion demonstrator.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.