| Issue |
MATEC Web Conf.
Volume 175, 2018
2018 International Forum on Construction, Aviation and Environmental Engineering-Internet of Things (IFCAE-IOT 2018)
|
|
|---|---|---|
| Article Number | 02020 | |
| Number of page(s) | 5 | |
| Section | Building Equipment Automation | |
| DOI | https://doi.org/10.1051/matecconf/201817502020 | |
| Published online | 02 July 2018 | |
Design and Analysis of a New Space Telescopic Mast
China Academy of Space Technology, 710000 Xi’an, China
The space telescopic mast has the characteristics of high rigidity, strong bearing capacity and simple deployment principle. Aiming at the shortcomings of large mass and limited screw length in the existing telescopic mast, a spiral climbing-driven telescopic mast was designed, and the structural design and kinematic analysis were studied. The verification results of the motion simulation through ADAMS software are consistent with theoretical calculations. The new telescopic mast has the characteristics of light weight, low manufacturing cost, and unrestricted length of single-section stretching.
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.