Issue |
MATEC Web Conf.
Volume 175, 2018
2018 International Forum on Construction, Aviation and Environmental Engineering-Internet of Things (IFCAE-IOT 2018)
|
|
---|---|---|
Article Number | 01010 | |
Number of page(s) | 4 | |
Section | Construction Materials | |
DOI | https://doi.org/10.1051/matecconf/201817501010 | |
Published online | 02 July 2018 |
Effect of waste ceramic adsorbent on wastewater treatment
School of Environmental andChemical Engineering, Foshan University, Foshan, China
* Corresponding author : 331538792@qq.com
The preparation of porous ceramic with waste porcelain powder as aggregate research. The influence of the amount of Sesbania powder and the calcination temperature on the adsorption performance of porous ceramics was investigated. The effect of the amount of porous ceramic and the adsorption time on the removal rate of Cu in wastewater containing Cu was investigated.The results showed that the adsorption properties of porous ceramics were related to the calcination temperature and the amount of Sesbania powder. The suitable calcination temperature and the amount of Sesbania powder were 600 °Cand 4 wt%, respectively.The removal rate of Cu in water samples increases with the increase of the amount of porous ceramics and the increase of adsorption time. The suitable amount of porous ceramics is 10 g/L and the adsorption time is 35 min. XRD characterization showed that the crystal particles were grown by calcination, and the properties of porous ceramics were stable before and after adsorption.
© The Authors, published by EDP Sciences 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.